Change ruckus firmware unleashed to zoneflex zone director

To be able to join Ruckus Zone Director/Smart Zone you must change your AP firmware from Unleashed to ZoneFlex.

Here is simple step by step to do it.

Prerequisites:

  1. 12 Volt adapter, minimum 1 Ampere with compatible plug or stand-alone POE switch (not connected to any network other than ruckus AP)
  2. Network Cable
  3. Ruckus ZoneFlex Firmware (v. 104.x.x.x)
  4. Original Ruckus Firmware (Unleashed: v. 2xx.x.x.x) – needed only for revert to original firmware
  5. Laptop with internet browser

Continue reading “Change ruckus firmware unleashed to zoneflex zone director”